How to maintain spinning reel parts

Spinning Reel Parts require regular cleaning and maintenance in order for them to function effectively. One of the key maintenance tips for Spinning Reel Parts is using the right type of lubricants. The most common error that people make is the use of wrong lubricants as well as too much lubrication on Spinning Reel Parts.

Determine the type of Spinning Reel Parts that you are using and buy the right lubricant. A light machine oil like the 3 in 1 or special purpose oil is highly recommended for the reel parts. The other oil that is advisable for use is the general purpose fishing reel oil as this works best on almost all the Spinning Reel Parts. Ensure that you grease all the parts spreading the oil evenly as this will enable the parts to perform effectively and you will be eliminating any chances of rust on the reel.

Spinning Reel Parts should be disassembled and taken for regular inspection. However, before dissembling the parts, it is quite essential to organize the tools, materials and the workplace where the inspection is going to take place. It is also vital that reel owners get all the necessary assembly information and proper maintenance tips Spinning Reel Parts. This will provide an efficient cleaning of the reel parts and proper monitoring of its operations. Clean the outside of the reel and determine if there is any part that is damaged or if there is any part that needs replacement. Turn the reel handle and listen for any odd sounds and rubbing noises. Noise on the handle is a clear indication that there could be a problem on the Spinning Reel Parts.

It is essential to tighten the drag and any other loose Spinning Reel Parts since a drag specifically generates lots of resistance against line being fed of the spool part being turned around smoothly. The spool part of the reel should turn easily with your hand and you notice that it cannot turn smoothly then replacement should be carried out.

Spinning Reel Parts should be active therefore you should try and use the bail several times twenty or more is the recommended. Ensure that the bail flips with a good snap and if it cannot, the bail could have been mounted tightly or the bail spring could be worn out. Check all the other anti reverse Spinning Reel Parts and other features of the reel and check whether all are moving smoothly, quietly and reliably. If so you will be assured that the parts are in their proper working condition, if not consider replacement. Moreover, the handle should rotate three to four times even on an old reel.

When cleaning and maintaining Spinning Reel Parts never leave any part untouched to avoid unforeseen damages. Wipe all the parts keenly both on the interior and exterior body of the reel. Once all the Spinning Reel Parts are clean and all the components have been inspected thoroughly, apply a very thin coat of grease to the shaft. Once a year, Open the reel and clean all Spinning Reel Parts exclusively and grease where necessary as part of annual Spinning Reel Parts maintenance schedule.


Justin Anderson

Click Here to Leave a Comment Below 0 comments

Leave a Reply: